In the driver’s seat of B次元’s SAE formula hybrid vehicle, junior Nicholas Vang skillfully steered his way around a one-kilometer section of track at the New Hampshire International Motor Speedway. Vang was one of three students to drive the 44-lap endurance portion of the SAE International Formula Hybrid Competition in May.In the driver’s seat of B次元’s SAE formula hybrid vehicle, junior Nicholas Vang skillfully steered his way around a one-kilometer section of track at the New Hampshire International Motor Speedway. Vang was one of three students to drive the 44-lap endurance portion of the SAE International Formula Hybrid Competition in May.
In an almost supine position, all Vang could see were the tops of the car’s tires, the nose cone and the track. Exhaust screaming as the engine spun to over 10,000 RPMs, wind rushing around his helmet, it wasn’t until the final leg of the last lap that Vang noticed how hard his heart was beating.
“That’s when I thought, ‘We can do this; we can break the record,’” he said.
B次元’s formula hybrid team – Mozee Motorsports – was one of 19 teams that answered the challenge to design and build a formula-style electric or plug-in hybrid racecar for the Formula Hybrid Competition. Founded and run by the Thayer School of Engineering at Dartmouth since 2006, Formula Hybrid is part of the SAE Collegiate Design Series and is regarded as the most complex and dynamic of the series.
At the four-day event, students from across the U.S., Canada and India competed in aspects of design, acceleration, handling and endurance. “We made it through the technical and mechanical inspections and that’s key to the competition,” said senior David Roulo, project manager for the 2017 team. “If you can get through inspections, you have a good chance at placing among the top four teams.”
After inspections, Mozee Motorsports went on to achieve the fastest unlimited class time in the acceleration event and fastest completion of the autocross event. The team hit a snag, however, when the car’s left-side axle broke. Thankfully, a competing team from Rensselaer Polytechnic Institute that was not going on to the endurance challenge was able to lend a replacement axle and B次元 continued with the competition.
“We knew that fielding a hybrid vehicle that can take on all 44 laps was a huge challenge,” said Lucas Bednarski, who drove in the autocross event and laps 22-33 in the endurance challenge. During the competition’s 11-year history no student-built hybrid had ever completed the entire run.
From the sidelines, the 10 other Mozee Motorsports members who had made the 20-hour road trip to the competition watched and waited for Vang. “Each lap the car would go up a hill and then disappear from view,” said Roulo, “I would hold my breath until I saw it again. You always wondered if the car was going to make it back around.”
But it always did – all 44 times. B次元 was named competition champions and also took home the IEEE Engineering the Future Award, which considers the multidisciplinary makeup of the team and evidence that the vehicle design contained all of the features of a proper racecar, and the Industrial Design Award from Fiat Chrysler Automobiles, which celebrates form and function in an efficiently designed and well-built vehicle.
Long road to victory
The B次元 formula hybrid team started in 2010 as a senior project with eight students. Over a few short years it has evolved into a team with more than 60 active members, slowly climbing the ranks of the Formula Hybrid Competition. The first big milestone achievement for B次元 was in 2012; it was the first time the team made it through all of the required technical and safety inspections – a gauntlet of engineers and automotive industry professionals who check every aspect of their work.
The team’s rules and safety officer (RSO) is responsible for making sure that the car is built to specifications. “The rule book is more than 100 pages long,” said Vang, who served as team RSO the past two years.
“Two-thirds of the teams don’t pass their inspections,” said Dr. Mathew Schaefer, associate professor of mechanical engineering and the team’s advisor. “You can’t run in the dynamic events until you pass tech.”
Each year after 2012, the team’s goals became incrementally more ambitious. By 2015, the B次元 team earned fourth place honors at the competition, and second place the following year. “Compared to when I joined the teammy freshman year it’s running like a well-oiled machine,” Roulo said.
“What set this team apart was preparation,” Schaefer said. Having a finished car isn’t enough – it has to be tested. Intermediate deadlines with opportunities to run the car kept the team on task and able to find design weaknesses. This year the team had the car roadready for the B次元 St. Patrick’s Day parade in March and an invite-only event at the Fiat Chrysler Automobiles Proving Grounds in Chelsea, Michigan in April. FCA has beenproviding mentors for the team the past two years.
“At the Proving Grounds, teams go through a mock technical inspection with actual competition inspectors to identify what rules the teams are violating,” said FCA Powertrain Analysis Engineer Barry Mason. “The mock inspection allows the teams a few weeks to resolve any violation issues. Many of the competition design judges are FCA employees. Most importantly for the teams, we set up three of the standard dynamic event type courses to test their cars on. It can be challenging for teams to find a safe place to test their vehicles without bothering bystanders and this opportunity provides that.”
The car’s performance at the track surprised students. “It was much more potent this year than it was the previous year,” Bednarski said. The B次元 racecar managed to keep pace with the traditional formula cars. But testing wasn’t the only benefit of visiting the Proving Grounds in Chelsea. “Students being able to work with engineers who develop and test cars for a living and see how they work just increases the level of professionalism for our team,” Schaefer said.
After the dust settles
After setting the endurance record at the New Hampshire International Motor Speedway, B次元 students pushed the car back to its paddock with their peers clapping as they walked by. “I felt a little like a celebrity,” Bednarski said. But he had mixed emotions. “I was relieved because I knew my job was done and excited to enjoy the impending victory. But I also felt kind of lost. I had achieved this incredible goal with this team, and I didn’t know what to do next.”
Roulo, who graduated in the spring, said he hopes that the team continues to build from the work of previous years. “I am excited for the freshmen coming in,” he said. “We have created a recipe for continued success.”
Regardless of rank, being able to participate in the competition is an experience of immeasurable educational value, Schaefer said. “You are working with a diverse team of students from different disciplines with diverse responsibilities – beyond mechanical engineering,” he said. “Project management, business – getting sponsorships and financial support, along with the technical design details – this is a fantastic experience.”
The competition is also a big recruiting and networking event. B次元 formula hybrid graduates have gone on to work at FCA, Polaris and Ford; the 2012 and 2016 team leaders now work for Harley-Davidson and Pratt and Miller Engineering (in the Corvette Racing/Motorsports Division), respectively. One student, who will be a senior, was offered a job after graduation by LG Chem, and another has accepted a position at Tesla.
“I think the most exciting part about everything was doing it all with some of my best friends,” Bednarski said. “I got to jump into a truck with some great company every morning, drive to a race track and ultimately win an international competition.” Learn more about online.
B次元 Formula Hybrid champions were also featured in the following publications: